Skip to content

Server time checker

Type a website address and we measure its server clock from the HTTP Date header, then keep it ticking on your screen.

Our server reads the site’s clock · Not loggedFree · No install

Server time checker

Examples:

Enter an address and press Check.

—

Short beeps 3, 2, 1 seconds before and a long beep on time. Keep this tab open with sound on.

How to use

  1. 1Enter the address of the site, e.g. ticketmaster.com, or tap an example.
  2. 2Press Check. A few quick requests measure the server clock and its accuracy.
  3. 3Watch the big clock and click at the right moment. Re-sync whenever you like.

About this tool

Why the server clock matters

Ticket sales, limited drops and course registration open at an exact second — on the seller’s server clock, not yours. Your computer or phone can easily be half a second or more off, so pressing the button when your own clock says 8:00:00 can be too early or too late.

This page reads the website’s own clock and shows it next to yours, so you can see exactly how far apart they are.

How the measurement works

  • Every web server sends a Date header with its current time, but only to the whole second.
  • Our Worker asks the site for its headers only (a HEAD request, never the page itself) and returns the Date header to your browser.
  • Your browser repeats this a few times, timed so that the server’s second ticks over during a request. Combining when each request left and came back narrows the true offset down to roughly one round trip — usually within ±100 ms.
  • After that the clock ticks locally on your device; there is no constant polling.

Reading the result

The big clock shows the server time in your time zone, with tenths of a second. Below it you see the accuracy (±) and how far the server is ahead of or behind your own clock.

Many big sites sit behind content delivery networks whose clocks are synchronised to atomic time, so the difference mainly tells you how far off your device is. If a site’s Date header looks cached, the page warns you.

Tips for ticket sales and registrations

  • Check the exact address of the booking page, not just the home page; some sites use separate servers.
  • Re-sync a few minutes before the start, and keep only the tabs you need open.
  • Set the beep a moment before the opening time and click when the clock turns over. Network delay still applies to your click.

Frequently asked questions

How accurate is it?

Usually within ±100 ms; the page shows the measured accuracy after every sync. It is limited by the network round trip because the Date header only has whole seconds.

Does it load the website?

No. Our Worker asks only for the response headers and reads the Date and Server values. The page content is never downloaded or shown.

Why can’t I check some addresses?

Private, local and reserved addresses (such as 192.168.x.x or localhost) and non-standard ports are blocked for security. A few servers do not send a Date header at all.

Does it keep asking the server?

No. A sync takes a few seconds and up to 12 requests; then the clock runs on your device. It re-syncs only when you ask or after several minutes.

Is my address history stored?

No. Addresses you check are not logged by us. Only a link with ?url= in the address bar lets you share or bookmark a check.